Cleats

Alloy cleating arms Grade 316 stainless steel fittings Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and...

Cast Iron, Hot dip galvanized Part# A B C D Fastener SD-040103 3.5" 1" 13/16" 1-5/8" #8FH SD-040104 4' 1-1/8" 7/8" 1-7/8" #10FH SD-040105 5" 1-5/16" 1-1/16" 2-3/16" #12FH SD-040106 6" 1-3/8" 1-1/4" 2-3/16" 1/4"

Aluminum/Nylon/Acetal Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom (see illustration at bottom of page). Aluminum construction means these cleats will stand up to more use and abuse than Nylon cleats will...

These economical yet durable camcleats from Race-Lite are just the thing for quick set and release of sheets and other lines on your sailboat. They are also handy for other jobs where precise adjustment of rope or line is needed. See also RL-261, and...

Herreshoff style Stainless Steel tie-down cleats. They are resistant to salt and sun, and will outlast your boat. Available in 4, 5, 6, & 8 inch sizes.(Note: the Potter factory specifies the 6" SeaDog Stainless Cleat for its 15 & 19 foot...

Features65mm (2 1/2") long.18mm (11/16") wide.4mm (5/32) mounting holes.Typically used on dinghies, catamarans and small keelboatsGrade 316 stainless steelHere is a view of the cleat from the front showing the fairlead or guide:

RF5000 Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance. Cam profile and mult-coil spring minimise line entry and release effort. Carbon fibre...

Viadana Camcleat #25.10Takes up to 5/16" rope or line Comes with manufacturer two-year warranty Material - Aluminum Min line size - 3mm / 1/8" Max line size - 8mm / 5/16" Hole Spacing - 27mm / 1 1/16" Hole Diameter - 4mm / 5/32" Max Working Load - 100 kg...

Anodized Aluminum - These cleats can be mounted flat or on a curved surface such as a boom. Aluminum construction means these cleats will stand up to more use and abuse than Nylon cleats will. Click HERE for installation...

Nylon construction with stainless steel mounting plate. Designed to mount on any 3/16" - 5/16" diameter shroud and used for tying off a halyard when not in use. Additional uses include mounting attachments for flags, solar showers, awnings, topping lift...

Similar to the RL-260 camcleat but with a glass-filled flange base for surface mounting. Use four countersunk #8 wood or machine screws. Available with or without stainless steel fairlead/strap. Bolts are on 1-1/2" centers - works best with 7/16" line or...

FEATURES Ball bearings support the cleat arm. An integral stop prevents over rotation, but can be removed to allow full 360° rotation. The cleating angle can be set in one of two positions - use the included riser kit for a higher cleating angle. A...