Multihulls

Katta 395 - 3.95m (metric plans)13' x 7-1/2' – 300 Lbs.Sail area 9.75 m² 105 Sq.Ft.A pocket cruiser catamaran for two with flat bottoms inspired by the genius Berque’s twin M5.Stich and glue building on light frames and bulkheads. A large rear beam...

You can find study plans for the DUO 1000 HERE Note: There is no building guide with these plans only dxf drawings and some sketches in pdf format - these plans are for experienced builders only.The DUO 1000 is a performance catamaran for the...

The first ECOnomy cruiser was designed 2003. The first multi hull with a negative bow by the way. The model is basically the same but the experience from owners/builders around the world is flowing in in this updated model. The ECO is a perfect...

After many requests for a bigger ECOnomy cruiser here she is. For dimensions see the specifications. The layout speaks for it self. This boat is a perfect boat for the whole family. It is designed for extended coastal cruising. Construction and design:...

A bridgedeck coastal cruising catamaran For Sardine Twin Study Plans, click HERE Sardine twin has been designed from the hull lines of the central hull of the Trimaran Sardine Run. She is built in France by Sardineboats, and plans can be ordered alone...

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it would...

The CAT 40 is a comfortable cruising catamaran using the latest thoughts on wide bodied hulls enabling much more accommodation than usual on a catamaran of this length. The standard arrangement has 8 dedicated berths (including 3 doubles) with the...

The Tikopian 24 is based on the 18' Waka Ama and uses the same stitch and tape plywood construction process. She has 4 seats plus stowage compartments in the ends of the canoe but can be fitted out in various ways - ie. with more seats and storage. The...

Hot Chili is a strong plywood asymmetric catamaran which can be built by anyone who can measure, cut and glue timber, can be towed by anything on four wheels, can be afforded by anyone with a job, and can be used anywhere with a foot of water. Chili can...

This is the latest racing version of the CAT 25 and embodies a long waterline hull with a light weight construction using tortured ply. The pre-shaped sides are simply stitched to the bottom and epoxied at a set angle. The 6mm sides are then pulled up...

These are full plans - for study plans click HERE This is our smallest offshore cruiser. A sea worthy fast cruiser catamaran for a family of four. The performance of this boat is exceptional on all courses to the wind. To make sure of this, the...

Owner reports "Saylon is very nice and is a like a rockstar to the Danube River, both sides (Romania and Serbia). Very comfortable" Scroll down to see a great sequence of build photos for the boat above I have resisted designing a small bridgedeck cabin...