Contact         Home         About        Catalog         FAQ         Duckworks Magazine
 

boat plans

canoe/kayak

electrical

epoxy/supplies

fasteners

gear

hardware

hatches/deckplates

media

paint/varnish

rope/line

rowing/sculling

sailmaking

sails

tools

 

Carbon Fiber Double Paddle Ferrules

Standard Paddle Size Double Paddle Ferrule - $25 ea.

If you make a fancy birdsmouth double paddle for your kayak, or even a solid wood paddle from a section of closet rod - you may want to be able to break it down for transport or storage. It will certainly fit in your car more easily that way. Now you can gain this versatility with one of our ferrules. Each allows a double paddle to be broken in two by simply pressing a button and twisting. The standard size ferrule has three different positions - 0°, +60°, and -60°.

These ferrules are custom made for Duckworks to exacting specifications. You will not be dissappointed by the workmanship or appearance.

The standard size ferrule (on the left) has three different positions - 0°, +60°, and -60°.

There are other uses for these ferrules too, such as for pushpoles. Read Rob Rohde-Szudy's article on using a ferrule with a wood pushpole.

Details for Standard size ferrules

The Standard size ferrules are 27.81mm ID and 30.6mm OD x 14" long. No screws are included - they can be epoxied to the shaft of your paddle.

These ferrules weigh 4.7 oz. each.

Dimensions:

 

 

 

Feedback:

I was just able to fit each blank on my old delta lathe so could only insert to a depth of 3" on each blank. 87.5" oal . Used it for 3hrs today on Banks Lake NWR. Total Weight , 36oz. Will try drip rings in the future. Used Devcon Epoxy. 4000psi.

Thanks, Stoney Stonestreet

Chuck,

As requested a few pics, afraid they are not great, so far the new ferrules have taken everything thrown at them, surfing, big seas, etc. no bother.

All the best, 

Dave.